Enkei
Enkei TFR Wheel
Enkei TFR Wheel
Couldn't load pickup availability
Simplify and add lightness. That’s the approach Enkei has taken with the all new TFR Tuning Series wheel. Seven perfectly contoured spokes start from a center with carefully placed cuts to save every ounce possible. The TFR is the wheel you can autocross with on the weekends and drive to work with during the week. It is truly versatile. The TFR is available in 17”, 18”, and 19” sizing in all new Copper, Storm Gray, and limited Gunmetal finishes. The wheel is finished off with Enkei’s signature flat center cap.
- Sizes 17, 18
- Storm Gray, Copper
- Spec-E Inspected
- MAT Technology
| Part No. | Finish | Size | Inset | Pattern / Bore | Face |
|---|---|---|---|---|---|
| 516-780-4445 | GR, ZP | 17x8 | 45 | 5x11272.6 Bore | F |
| 516-780-6535 | GR, ZP | 17x8 | 35 | 5x114.372.6 Bore | F |
| 516-780-6545 | GR, ZP | 17x8 | 45 | 5x114.372.6 Bore | F |
| 516-780-8045 | GR, ZP | 17x8 | 45 | 5x10072.6 Bore | F |
| 516-790-6540 | GR, ZP, GM |
17x9 | 40 | 5x114.372.6 Bore | F |
| 516-790-8045 | GR, ZP, GM |
17x9 | 45 | 5x10072.6 Bore | F |
| 516-880-4445 | GR, ZP | 18x8 | 45 | 5x11272.6 Bore | F |
| 516-880-6540 | GR, ZP | 18x8 | 40 | 5x114.372.6 Bore | F |
| 516-880-8045 | GR, ZP | 18x8 | 45 | 5x10072.6 Bore | F |
| 516-885-6538 | GR, ZP, GM |
18x8.5 | 38 | 5x114.372.6 Bore | F |
| 516-885-6545 | GR, ZP, GM |
18x8.5 | 45 | 5x114.372.6 Bore | F |
| 516-885-8045 | GR, ZP, GM |
18x8.5 | 45 | 5x10072.6 Bore | F |
| 516-895-6538 | GR, ZP, GM |
18x9.5 | 38 | 5x114.372.6 Bore | R |
| 516-895-8045 | GR, ZP | 18x9.5 | 45 | 5x10072.6 Bore | R |
| 516-985-4435 | GR, ZP | 19x8.5 | 35 | 5x11272.6 Bore | F |
| 516-985-6535 | GR, ZP | 19x8.5 | 35 | 5x114.372.6 Bore | F |
| 516-985-6545 | GR, ZP | 19x8.5 | 45 | 5x114.372.6 Bore | F |
| 516-995-6515 | GR, ZP | 19x9.5 | 15 | 5x114.372.6 Bore | R |
| 516-995-6535 | GR, ZP | 19x9.5 | 35 | 5x114.372.6 Bore | R |
MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.
SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.
