Enkei
Enkei TS-10 Wheel
Enkei TS-10 Wheel
Couldn't load pickup availability
The all-new Enkei TS-10 takes the simplest approach to achieving Enkei’s philosophy in creating a lightweight and strong wheel. It’s 10 cleanly cut spokes reach the very edge of the wheel, creating the illusion that the wheel is bigger than its true size. The TS-10 is available in concave and flat face profiles dependent on size and width. The TS-10 is finished off with Enkei’s signature flat center cap and is available in new storm gray, gloss black, or limited gold paint.
- Sizes 17, 18
- Storm Gray, Gloss Black or in Gold (limited sizes)
- Spec-E Inspected
- MAT Technology
| Part No. | Finish | Size | Inset | Pattern / Bore | Face |
|---|---|---|---|---|---|
| 499-780-4940 | GR, BK | 17x8 | 40 | 4x10072.6 Bore | F |
| 499-780-6535 | GR, BK | 17x8 | 35 | 5x114.372.6 Bore | F |
| 499-780-6545 | GR, BK | 17x8 | 45 | 5x114.372.6 Bore | F |
| 499-780-8045 | GR, BK, GG |
17x8 | 45 | 5x10072.6 Bore | F |
| 499-790-6535 | GR, BK, GG |
17x9 | 35 | 5x114.372.6 Bore | F |
| 499-790-6545 | GR, BK | 17x9 | 45 | 5x114.372.6 Bore | F |
| 499-790-8045 | GR, BK | 17x9 | 45 | 5x10072.6 Bore | F |
| 499-880-4445 | GR, BK | 18x8 | 45 | 5x11272.6 Bore | F |
| 499-880-6540 | GR, BK | 18x8 | 40 | 5x114.372.6 Bore | F |
| 499-880-6550 | GR, BK | 18x8 | 50 | 5x114.372.6 Bore | F |
| 499-880-8045 | GR, BK | 18x8 | 45 | 5x10072.6 Bore | F |
| 499-885-6525 | GR, BK, GG |
18x8.5 | 25 | 5x114.372.6 Bore | F |
| 499-885-6535 | GR, BK | 18x8.5 | 35 | 5x114.372.6 Bore | F |
| 499-885-6550 | GR, BK | 18x8.5 | 50 | 5x114.372.6 Bore | F |
| 499-885-8045 | GR, BK | 18x8.5 | 45 | 5x10072.6 Bore | F |
| 499-895-6515 | GR, BK | 18x9.5 | 15 | 5x114.372.6 Bore | R |
| 499-895-6535 | GR, BK | 18x9.5 | 35 | 5x114.372.6 Bore | R |
| 499-895-8045 | GR, BK | 18x9.5 | 45 | 5x10072.6 Bore | R |
| 499-8105-6525 | GR, BK | 18x10.5 | 25 | 5x114.372.6 Bore | R |
MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.
SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.
